DTV2000DS LINUX DRIVER

This fix is from http: However, I spent two weeks trying to get the remote control Y04G to work with the new kernel 2. All is described here:. Retrieved from ” https: To use the previous version replace the “wget” line in step 5 with:. I have tried using evtest, mode2, and irw to no avail.

Uploader: Taktilar
Date Added: 17 July 2005
File Size: 6.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 8678
Price: Free* [*Free Regsitration Required]

Digital Tuner Cards

Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases tdv2000ds V4L. I expect this means the card is supported out of the box on You should have the card operating correctly now. This seems to be caused by power management on the USB bus.

I Gregoryo have had no success with the remote, but there is hope from dmesg:.

This fix is from http: To use the previous version replace the “wget” line in step 5 with:. I have tried using evtest, mode2, and irw to no avail. To do a true cold boot to replicate the act of pulling out a USB device make sure the mains power cord is removed – some PSUs have a rocker switch that will do the same job – and wait about seconds for the 5V bus to dtv2000fs down completely before reapplying power.

  GRAPHTEC FC7000MK2-75 DRIVER

If you have recent kernels such as 2. Similar problem is described here for a Haupage card: There is another issue that better get fixed and it is to do with I2C byte write numbers.

Leadtek WinFast DTVDS PLUS – LinuxTVWiki

The real solution is based on the bug found in http: Then shut down your computer important if you’ve been trying to load this card already, as the correct firmware will be loaded and turn it on again After a while it would lose that tuner and the only way to get it to work again was to cold boot.

Until then we all have to sweat it a bit!! This is based on the following commit: I get no indication of any signal coming from the remote. The rest of the process is still the same. The remote control emulates a keyboard but it very often generates more keypresses than what was put in.

Retrieved from ” https: It is currently not supported out of the box, though it can be made to work in some circumstances. This is based on debian flavours. Views Read View source View history. However there is a patch missing which enables support: Am I missing a kernel driver module?

  GP300 405 PCL DRIVER

However, I spent two weeks trying to get the remote control Y04G to work with the new kernel 2. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn’t intend.

V4L/DVB: af9015: support for Leadtek WinFast DTV2000DS [Linux 2.6.34]

It emulates a keyboard so no LIRC required. The previous firmware version is more stable. Still only 1 tuner working. Disabling the power management on the USB bus fixed this problem. All is described here:.

Curiously, the power supply in my machine failed a Dell OptiPlex – Small Form Factor and I connected the machine up to a bigger power supply from another machine. The frequencies are given in Table 41 in the datasheet http: Here I am referring dtv2000ss a specific tag of the repository, i. This page was last modified on 6 Februaryat