Also, out of curiosity — do you know what the x means? We lifted the service station hundreds of times to rinse it out. As I recall the scanner cover lifts off and the glass is held in place by four T20 Torx head screws. Also the side bars open and then close as if it thinks it has finished printing. I had the same problem occur on my HP officejet C. Well, I do appreciate very much your help on this. I have repaired lots of these and once the rollers are properly cleaned and reconditioned, they always pick up paper.
|Date Added:||4 February 2008|
|File Size:||41.93 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
hp officejet pro c | FixYourOwnPrinter
Turned the power off and then it finally was ok. But then it said the carraige door was open. If the top of it is flat, the cartridges are hitting it and getting clogged. If that solves the problem, use rubber rejuvenator as a long ofvicejet solution.
Officejet Pro c Driver install for Windows 8 – HP Support Community –
It looks like your machine has been declared ‘printer non grata’ by Vista and HP. We did use mild soap and rinsed thoroughly, dried it out by gently shaking the service station. Hello Bert, well you did it again; the “white streaks” disappeared after following your instructions. I recently had noted a faded, streaking in the black ink printing.
If the problem persists, first, make sure that the computer-printer cable is good and connected solidly on both ends.
You should see officdjet, magenta, and cyan flowing freely. I’m thinking it was straight but a friend thinks I should turn it towards where the ink cartridge comes up to it? The little arm is not jammed on the white gear, and I have cleaned the clear plastic strip.
The scanner glass is held in place by four T20 Torx head screws, two in the front under snap-on covers and two in officejey back. On both my machines there is a horrible noise and vibration at this point.
HP Officejet Pro 1150c / 1150cse All-in-One Driver 1.0 for Win 2000
It’s a little messy so you may want to wear latex gloves. Unfortunately, I cannot seem to remove the bottom half of the paper input tray. I use it all the time for programs that I am in charge of and I ifficejet I won’t find another worthy printer out there. Wear latex gloves in order to avoid ink stains on your hands.
Hope this helps you. Not sure how to get into machine and what to tighten up when I do get in.
If the bulb still lights up, you can also try cleaning the scanner mirror and the underside of the scanner glass. After several hours of “online” ph with an HP guy named Irving I doubt it is his real name! Cheap printers are cheap to buy but not cheap to operate and some of them are down right unreliable. If all else fails a few enterprising individuals have replaced the scanner bulb. So this is my problem.
It was a good machine but not immortal. I suggest dismantling the printer – assume it’s similar to the C and trace the mechanics of the process. Does the printer show signs of life other than the scanner error and fading display, e. Thanks for marking this as the answer. The printing just seems to stop half offidejet down the page, the printer does not 11150c to be evening trying offifejet print the rest of the information on the page, or clear the page from the around the spindle.
It is picking up the paper OK and printing right at the top. Refer to this link to learn how to install the drivers in compatibility mode for Windows XP: Many thanks for your post!
If this fails, the paper isn’t raised.
Can you tell me what this error message means and whether it results from something I might be able to fix myself? Upon restarting the printer it all seemed to operated properly and no error appeared.
Select the closest length and diameter from the web page below.